BENXI KINGDA TUNGSTEN AND MOLYBDENUM CO.,LTD
|
OFFICE ADD:NO.2-16-28 JIACHENG APARTMENT QUNYI PINGSHAN BENXI LIAONING CHINA
WORK ADD : NO.246, MINGSHAN, BENXI LIAONING, CHINA
TEL : 86-024-43228233 OR 86-138-0414-4106 ; FAX : 86-024-43228533
E-MAIL : kingda@tungsten-mo.com ; or licunxn@hotmail.com ;
Skype: licunxn ; ........WhatsApp: +86 138 0414 4106
Web.Site. : http://www.tungsten-mo.com |
|
|
|
|
Cleaned Mo wire
|
|
Molybdenum Wires or Spraying Mo wire (Cleaned or not Cleaned )
Diameter:φ0.06-4.0mm
Coil Weight: 1kgs-25kgs/coil as customer requirements
Use: For making hook, mandrel, filaments, lamp filaments, spark profile cutting, heater rod, guide rod, lead, temperature-resistance devices, spraying surface for vehicle or car parts etc.
Classification and Composition:
Pure Mo wire: Mo≥99.95% Fe≤0.005% Al, Mg, Ca≤0.002% Ni,Si≤0.003%
Other elements≤0.001%
MoLa wire (rare earth wire): Mo with Lanthanum
Cleaned Molybdenum Wires
Use: The surface of electrolytic polished molybdenum wire shall be clean, smooth and bright, uniform in dimension. Mainly used for mandrel of spiral filaments, lead, support and other components.
Packing:In wooden or carton cases |
|
|
|
Molybdenum Rods (Ground/Machined/Cleaned Surface)
Use: Used for making components in electronic vacuum devices, guide rod, electrode, lead ,high temprature- resistance devices, heating part in vaccum furnace.
Classification:
Swaged Molybdenum Rods: From Diameter φ3.0-15.0mm.
Straightened Molybdenum Rods: From Diameter φ0.8-3.0mm
Forged: From Dia 10-150mm
Ground/machined/cleaned Molybdenum Rods: From Diameter φ1.0-80.0mm.
Classification and Composition:
Mo1 rods : Mo≥99.95% Fe≤0.005% Al, Mg, Ca≤0.002% Ni,Si≤0.003% Other elements≤0.001%
MoLa rods (rare earth rods) |
|
|
|
|
Molybdenum Plates /Sheets/Foil
Features: The plates by hot and cold rolling have good surface and comprehensive properties with high quality Mo powder, which are widely used in heating part of vacuum furnace; electronics; semiconductor parts, heater, heat-shield , crucibles, lightening ,making boats etc.
Thickness:0.01-100.0mm; Width:≤700mm; Length:≤1500mm or as customers required.
MoLa Sheet/Plate/Foil (rare earth rods) |
|
|
|
Molybdenum discs
Gravity:10.2g/cm3
Use: Used for semiconductor parts and vacuum parts and Vacuum furnace Industry.
Parallelism<0.01MM
Planeness<0.01MM a a Hardness:220-270HV
Specification:diameter(φ6-150) x Thickness(0.2-6.0)mm or as customers required. |
Mo Basic target
|
|
|
Molybdenum Boats,Molybdenum Heater, Molybdenum Structural Parts, Molybdenum Crucibles, Molybdenum Screw & Nuts, Molybdenum Piercing head, Molybdenum Electrodes and Special Shaped Mo metal ect or according to customers’ requirements.
Use:For melting jeweler crytal material, Sapphire Industry,Ceramics material,rare earth material etc devices,high temperature resistance parts for producing refractory,glass fiber material and for X-Ray tubes etc.
|
|
|
|
|
|
|
|
|
